LTERIVER PCI Express X4 to 6-Ports Serial ATA/SATA 3.0 Host Controller Card- Plug and Play on Windows OS, MAC OS and Linux Systems-6X 6Gbps Max SATA 3.0 None Raid Ports-Support AHCI Boot Up (PCE-G2S6)

LTERIVER PCE-G2S6 is a PCI Express Gen3 to SATA III (Serial ATA) 6Gbps controller. It will covert PCIE X2 signal on X4 interface to 6-Ports SATA III on desktop PCs and Servers. Allow users add 6X max SATA HDD/SSD on their system for Boot or storage use. This PCIE SATA III card will support Plug and Play on Windows, Linux, and MAC OS systems, now no need to install driver anymore for PCIE SATA expansion cards. WARNING: 1.This PCE-G2S6 PCIE SATA card no need driver, if PCs or Servers cannot find the added-on HDD/SSD and this device, then double check if the mother board PCIE slot is active and open. Some brand mother board may have defined PCIE function when it produced. User better call mother board manufacture locate the problem. 2.PCE-G2S6 was set on AHCI mode. If users using the classic IDE mode, user’s PC will report BSD error. If users do not know which mode is running on PCs, follow steps as below: Windows Device Manage-IDE ATA/ATAPI Controllers- Will see “XXXX SATA AHCI controllers” or "XXX IDE controllers". 3. PCE-G2S6 is designed on PCIE X4 interface, will works on PCIE X4, X8, X16 slot, not support PCIE X1 slot. Normal mother board will have X16 and X1 only, so users better check if it has empty PCIE X16 slot before purchase. Package: 1X PCE-G2S6, 1X User Manual, 1X Low Profile Bracket, 1X Mount Screw, 6X SATA Cable