BCZAMD 3D Printer Upgrade Part: Prusaa MK3 MK3S MK3S+ MK4 MK52 Build Plate 253.8x241mm Powder Coating PEI Textured PET Heatbed Removable and Flexible Heated Bed Imdinnogo

What you can get? A beautiful and high quality build plate, one side is powder coating PEI, anther side is diamondTexture PET. Also come with 2pcs sandpaper. Notes: 1. If the adhesion of the powder surface is not sufficient, use the equipped sandpaper to lightly sand the surface to increase its adhesion. 2. The nozzle should not touch the panel directly to prevent burning the surface of the build surface. 3. The distance between the nozzle and the platform should be within 0.05-0.2mm to ensure that the consumables adhere to the printing platform. A speed of 10-25mm/s is recommended for the first layer and the cooling fan needs to be switched off for the first 1-3 layers of printing. 4. The leveling nozzle should not be too low, if the nozzle cuts the platform it will cause permanent damage, if the first layer is too low it will cause the adhesion to be too tight and cause the pick-up to tear the surface. 5. It is recommended to take the mold after cooling, not cooling to take but the mold adhesion is stronger, easy to cause the surface off. 6. Steel plates are consumables that have a life span and can be used in the correct way to extend the life span. Please use it in accordance with the above requirements!